Space between spiral rings, hatch lines, dots or wave lines.
Outlines: the pen goes around each dark shape.
Centerlines: for line drawings, each line drawn once.
Spiral: one line from the center, wiggling where dark.
Hatch: crossed lines shade photos; darker gets more.
Stipple: dots, more where darker.
Lines: level lines that wave where dark.
Fixes drawings when the pen's line misses the platter center. Negative = other side.
For a spring pen holder: how far pen down presses past the touch point (at most 3 mm). Calibrate's Pen height uses it, and puts pen up 2 mm above the touch.
For drawings that come out mirrored.
A switch on the carriage's motor side, wired to X limit and GND. Home finds it and sets the center. Measure it once in Calibrate, Find center.
If the circle closes and the spoke is straight, the machine is fine. Start with G92 X0 Y0 Z0, pen on the center.
For GRBL settings like $$ or $101=29.6. Connect first.